QUICK COLLOIDAL SILVER GENERATOR – QUICKLY !!!



YOU CAN MAKE A COLLOIDAL SILVER GENERATOR BY BUYING ANY DOLLAR STORE SOLAR GARDEN LIGHT.

TRY TO BUY ONE WITH THE LED AND IT’S LEADS STICKING OUT.THIS WILL SAVE YOU FROM OPENING THE SOLAR GARDEN LIGHT TO GET TO THE WIRES.

THEN GET A SCISSOR AND CUT ANY ONE OF THE LED LEADS IN THE MIDDLE.

THEN GET TWO THIN WIRES AND
AND CONNECT THEM TO THE CUT LEADS.

YOU CAN EITHER SOLDER THEM OR JUST WRAP THEM ROUND THE LEADS
AND BEND THE LEADS TO ANCHOR THEM WITH PLIERS.

ONCE DONE YOU CONNECT THE WIRES TO TWO 99.99% PURE SILVER RODS.

YOU CAN USE TERMINAL BLOCKS OR SPRING LOADED CONNECTORS OR SOLDER OR JUST TWIST THE WIRES AROUND THE SILVER RODS.

I CHOSE SPRING LOADED CONNECTORS FROM EBAY.

TO MAKE COLLOIDAL SILVER COVER THE SOLAR CELL WITH CARDBOARD TO SWITCH ON THE GARDEN SOLAR LIGHT AND DIP BOTH SILVER RODS IN DISTILLED WATER OR WATER WHICH HAS BEEN BOILED.

YOU WILL SHORTLY SEE WISPS OF COLLOIDAL SILVER COMING OF ONE OF THE RODS.

ALSO YOU WILL SEE THE LED GLOWING AS YOU SOON AS YOU PUT THE SILVER RODS IN THE WATER.

THIS GIVES A VISUAL INDICATION OF CURRENT FLOW.YOU CAN ALSO PUT A A 1K TO 10 K RESISTOR IN SERIES WITH ONE OF THE SILVER RODS TO FIX THE CURRENT.THIS IS AN OPTIONAL EXTRA.

THE LOWER THE CURRENT THE SMALLER THE PARTICLE SIZE.

A RED LASER POINTER WILL SHOW THE TYNDELL EFFECT AFTER A FEW MINUTES LIKE A RED LIGHT SABER
THROUGH THE WATER.

THE AVERAGE MEASURED CURRENT FLOW THROUGH THE WATER WAS
ABOUT 0.2 MILLIAMPS FOR THE WHITE LED SOLAR LIGHT TO 0.27 MILLIAMPS FOR THE RED LED SOLAR LED LIGHT WHEN THE SILVER RODS WERE IMMERSED IN THE WATER.

SEE THE VIDEO.TO AVOID BORING YOU I HAVE USED A SHAKY CAM TO MAKE IT REALISTIC.

source

Learn more about colloidal silver and other colloidal metals

Purchase best quality colloidal silver products

Leave a Reply

Your email address will not be published. Required fields are marked *